LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1991 >> Samurai JS >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine General Information And Diagnosis) >> Diagnostic Information and Procedures >> DTC P0455 >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pressurize the EVAP system to 5 inches H20.
  2. Compare the Fuel Tank Pressure sensor parameter with a scan tool to the J 41413-200 pressure/vacuum gauge. The scan tool FTP sensor parameter should be within 1 inch H20 of the pressure/vacuum gauge.
  3. Command the EVAP vent valve open with a scan tool.
  4. The scan tool Fuel Tank Pressure parameter should be 0 inches H20.
    • If the FTP sensor parameters do not respond to the change in pressure, replace the FTP sensor.
scientia non olet · About LEMON Manuals