Component Testing
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the EVAP purge solenoid. Test for 15-20 ohms of resistance between the terminals of the EVAP purge solenoid.
- If the resistance is not within the specified range, replace the EVAP purge solenoid.
- Test for infinite resistance between each terminal of the EVAP purge solenoid and the EVAP purge solenoid housing.
- If less than infinite resistance, replace the EVAP purge solenoid.