Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Fluid Level Sensor Electrical Connector

Courtesy of SUZUKI OF AMERICA CORP.

Remove the underhood electrical center. Refer to UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT .
Disconnect the brake fluid level sensor electrical connector.

Fig 2: Identifying Brake Fluid Level Sensor
Courtesy of SUZUKI OF AMERICA CORP.
While simultaneously depressing the retaining tabs on the opposite side of the sensor electrical connection, carefully pull the sensor from the master cylinder reservoir.
Remove the low brake fluid level sensor.