Brake Pressure Modulator Valve Bracket Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Pressure Modulator Valve Bracket

Courtesy of SUZUKI OF AMERICA CORP.

BRAKE SYSTEM SCHEMATICS TABLE

Callout	Component Name
Preliminary Procedure Place the ignition switch in the OFF position.
1	Brake Modulator Assembly Bracket Bolt CAUTION: Refer to FASTENER NOTICE . Tightening torque 20 N.m (15 lb ft)
2	Brake Modulator Assembly Bracket Nut (Qty: 2) Tightening torque 10 N.m (89 lb in)
3	Brake Modulator Assembly Bracket Tip: Without disconnecting the brake pipe fittings, carefully remove and support the brake modulator assembly.