No. 5-4 Downshift
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC TABLE - NO 5-4 DOWNSHIFT
| Checks | Actions |
|---|---|
| DEFINITION: No fifth gear to fourth gear downshift | |
| External Automatic Transmission Control Valve Body Assembly (39) | |
|
Verify that all solenoids respond electrically. If there is no response, perform an electrical diagnosis. If there are no electrical concerns, remove the solenoid valve assemblies as needed, and inspect the solenoid O-ring seals, and the solenoid bores for signs of damage and/or missing seals. If the solenoid valves responded electrically and there are no bore or seal concerns, replace the solenoid valve assemblies as necessary due to possible internal mechanical concerns and retest. If a condition is still present after replacing the solenoid valve assembly, replace the complete automatic transmission control valve body assembly (39). |
| Internal Automatic Transmission Control Valve Body Assembly (39) | |
|
Remove the automatic transmission control valve body assembly (39) and inspect the items listed. Inspect the internal bores and the valves for signs of wear and/or damage, including internal contamination. If unable to verify any repairable concerns, replace the complete automatic transmission control valve body assembly (39). |
| Clutch - Mechanical/Hydraulic | |
| 2nd Coast Clutch and 2nd Clutch Hub and 2nd Clutch Sprag Assembly (11) | Remove the torque converter assembly (1) the fluid pump assembly (2), and the 2nd Coast Clutch and 2nd Clutch Hub and 2nd Clutch Sprag Assembly (11). Inspect all related components for proper operation. Repair or replace as necessary. |