LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1991 >> Samurai JS >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Heater And Ventilation) >> Repair Instruction >> Blower Case Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the HVAC module assembly. Refer to REMOVAL PROCEDURE .
  2. Remove the evaporator case assembly. Refer to REMOVAL PROCEDURE .
  3. Remove the air inlet assembly. Refer to REMOVAL PROCEDURE .
    Fig 1: Identifying Blower Motor Screws
    G04844319Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the blower motor screws from the blower case assembly.
  5. Remove the blower motor from the blower case assembly.
    Fig 2: Identifying Blower Motor Control Module Screws
    G04844320Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the blower motor control module screws from the blower case assembly.
  7. Remove the blower motor control module from the blower case assembly.
    Fig 3: Identifying Blower Case Assembly Retaining Screws
    G04844321Courtesy of SUZUKI OF AMERICA CORP.
  8. Remove the screws retaining the two halves of the blower case assembly.
  9. Separate the two halves of the blower case assembly.
  10. Remove the evaporator core from the blower case assembly.
scientia non olet · About LEMON Manuals