Removal & Installation: Inspection
WARNING: This page is about a different car, the 1994 Suzuki Samurai. However, it is still accessible from the selected car via links, so may be relevant.
- Check flywheel and pressure plate contact surface for damage. Replace clutch disc if rivet head depression is .02" (.5 mm) or less. Mount clutch disc on transmission input shaft. Turn disc back and forth to check backlash in disc serrations.
- Replace clutch disc if backlash exceeds .03" (.8 mm). Inspect pressure plate assembly for loose diaphragm spring rivets. Check diaphragm fingers for wear. Replace parts as necessary.