Thrust Bearing
WARNING: This page is about a different car, the 1993 Suzuki Swift. However, it is still accessible from the selected car via links, so may be relevant.
- With crankshaft bearing caps installed, check thrust clearance (end play) using dial gauge to read displacement in axial thrust direction of crankshaft.
- Standard thickness of thrust bearing is .0984" (2.50 mm). Oversize thrust bearings are available in increments of .0049" (.125 mm). If clearance exceeds specification, replace thrust bearing. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS table under ENGINE SPECIFICATIONS.