Cylinder Block Specifications

WARNING: This page is about a different car, the 1993 Suzuki Swift. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK SPECIFICATIONS

Application

In. (mm)

Cylinder Bore

Standard Diameter ⁽¹⁾

"1"

2.9138-2.9142 (74.010-74.020)

"2"

2.9134-2.9138 (74.000-74.010)

Maximum Taper

.0039 (.10)

Maximum Out-Of-Round

.0039 (.10)

Maximum Deck Warpage

.002 (.05)

⁽¹⁾	Cylinder bore diameter is determined by numerical mark ("1" or "2") stamped on cylinder block. See Figure .