LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1990 >> Swift GA, 2D Hatchback >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - EEC/MX1 >> On-Vehicle Service >> Back Drive Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Back Drive Cable: Removal

  1. Remove steering column cover and column hole cover. Remove back drive cable clamp screw located at steering lock. See Figure .
  2. Push in release shaft "A" and disconnect cable end. With control box and parking brake lever cover removed, take out cable by loosening nut and removing clip in manual selector.
NOTE: When outer cable is pulled in arrow "C" direction, release shaft spring in steering lock should be depressed fully. Ensure ignition key can be turned from ACC to LOCK position and removed from key cylinder when selector lever is in "P" position. Ensure key can not be turned to LOCK when selector lever is in any other position than "P".
scientia non olet · About LEMON Manuals