LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1990 >> Swift GA, 2D Hatchback >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - EEC/MX1 >> Component Disassembly & Reassembly >> Countershaft & Output Shaft >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Countershaft & Output Shaft: Disassembly

  1. Note order of components during disassembly procedure for reassembly reference. Remove countershaft snap ring. Remove backing plate (rear cover side). Using Bearing Remover (09941-64511) and Sliding Shaft (09930-30102), remove front and rear countershaft bearings. See Figure .
  2. Support output shaft with soft-jawed vise. Using bearing puller, remove output bearing (cover side). Hold bearing (inside) with bearing puller, and remove output shaft with a press.
scientia non olet · About LEMON Manuals