Cylinder Block Specifications

WARNING: This page is about a different car, the 1989 Geo Metro. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK SPECIFICATIONS

Application

In. (mm)

Maximum Block Warpage

Standard

.0012 (.03)

Service Limit

.0024 (.06)

Cylinder Bore

Standard Diameter ⁽¹⁾

2.9138-2.9142 (74.010-74.020)

Maximum Taper

.0039 (.100)

Maximum Out-of-Round

.0039 (.100)

⁽¹⁾	Cylinder block is stamped with cylinder bore diameter I.D. Specification is for I.D. No. 1. I.D. No. 2 is 2.9134-2.9138" (74.000-74.010 mm).