Draining & Refilling: Tracker
WARNING: This page is about a different car, the 1989 Geo Tracker and 1989 Geo Prizm. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect lower "U" joint flange and move drive shaft out of way. Remove oil pan bolts and drain fluid. Remove and clean oil pan. If necessary, replace filter screen.
- Install filter screen, and tighten bolts to 14 ft. lbs. (19 N.m). Using new gasket, install oil pan. Tighten oil pan bolts to 96 INCH lbs. (11 N.m). Refill and check fluid level.