Rocker Panel Molding Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rocker Panel Molding Components

Courtesy of SUZUKI OF AMERICA CORP.

ROCKER PANEL MOLDING REFERENCE TABLE

Callout	Component Name
1	Rocker Panel Molding Screw CAUTION: Refer to FASTENER NOTICE . Tightening torque 2 N.m (18 lb in)
2	Rocker Panel Molding Nut
3	Rocker Panel Integral Clip (Qty: 9)
4	Rocker Panel Molding Integral Retainer (Qty: 8) Tip: Remove the rocker panel from the vehicle by prying the clips away from the vehicle. Retainers break easily, install new retainers as necessary.