Oil Pump Assemble

Reference: OIL PUMP CLEANING AND INSPECTION .

Fig 1: Identifying Oil Pressure Relief Valve Components

Courtesy of SUZUKI OF AMERICA CORP.

1. Install the oil pressure relief valve components.
   1. Install the oil pressure relief valve.
   2. Install the oil pressure relief valve spring.
   3. Install the oil pressure relief valve bore plug.
   4. Install the oil pressure relief valve bore plug retainer C-clip.
      Fig 2: Locating Dimpled Surface

      Courtesy of SUZUKI OF AMERICA CORP.
   NOTE: There are no serviceable components within the oil pump. Disassemble the pump only to diagnose an oiling concern. A disassembled oil pump must be replaced. DO NOT reuse a disassembled oil pump or a serviceable oil pump with a primary camshaft drive chain lower guide that needs to be replaced.
2. The dimpled surface must be face-up in the pump body.
   Fig 3: Positioning Inner & Outer Rotors In Oil Pump Cover

   Courtesy of SUZUKI OF AMERICA CORP.
3. Install the inner and the outer rotors in the oil pump cover in the same orientation as removed.
4. The outer rotor has a dimple to indicate the outer surface.
   Fig 4: Positioning Oil Pump Housing & Cover

   Courtesy of SUZUKI OF AMERICA CORP.
5. Assemble the oil pump housing and cover.
   Fig 5: Identifying Oil Pump Bolts

   Courtesy of SUZUKI OF AMERICA CORP.
   CAUTION: Refer to FASTENER NOTICE .
6. Install the oil pump bolts.

   Tightening torque 

   Tighten the oil pump bolts to 10 N.m (89 lb in)  .

Reference: OIL PUMP INSTALLATION .