Rear Window Wiper Arm Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Wiper Arm Nut Finish Cap & Windshield Wiper Assembly

Courtesy of SUZUKI OF AMERICA CORP.

REAR WINDOW WIPER ARM TABLE

Callout	Component Name
1	Rear Wiper Arm Nut Finish Cap
2	Rear Wiper Arm Nut CAUTION: Refer to FASTENER NOTICE . Tightening torque 28 N.m (21 lb ft) Tip: Hold the blade tip on the first defroster grid line while torquing the wiper arm nut.
3	Windshield Washer Arm Assembly Position wiper blade assembly above the blackout strip as shown in Fig 1. Position the blade element on the first defroster grid line, above the blackout. Operate the windshield wipers and inspect for proper operation.