LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1990 >> Sidekick JS >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Overhaul - THM 400) >> Transmission Reassembly >> Rear Servo
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Servo

WARNING: This page does not describe the selected car, but rather 124 other vehicles, including the 1991 Chevrolet Pickup, 1991 Chevrolet Cab & Chassis, 1988 GMC Vandura Special, 1988 GMC Vandura, and 1988 GMC Value Van. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before installing servo, check band apply pin. See BAND APPLY PIN SELECTION CHECK under FRONT & REAR SERVO ASSEMBLY  under TRANSMISSION DISASSEMBLY. Ensure rear band apply lug is aligned with servo pin bore in transmission case.
  2. Lubricate servo bores with transmission fluid. Install rear accumulator spring in servo inner bore. Install rear servo assembly. Ensure it seats properly in bore. With servo depressed, install gasket and cover. Tighten attaching bolts.
scientia non olet · About LEMON Manuals