Removal & Installation: Inspection
WARNING: This page is about a different car, the 1994 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
- Check wear on facings of clutch disc by measuring depth of each rivet head. Minimum depth at any rivet is .02" (.5 mm). Replace clutch disc if not within specification.
- Check diaphragm spring and pressure plate for wear and damage. If assembly is excessively worn or damaged, replace pressure plate. Check pilot bearing rotation. If roughness is felt, replace bearing. Inspect flywheel runout.
- Clean flywheel and pressure plate of all oil, grease, and metal deposits. Inspect for damage, cracks or warpage. Remove slight surface scoring with sandpaper. Replace or repair as necessary.