Tracker (Transmission & Transfer Case)

WARNING: This page is about a different car, the 1992 Geo Tracker, 1992 Geo Storm, 1992 Geo Prizm, and 1992 Geo Metro. However, it is still accessible from the selected car via links, so may be relevant.

Transmission and transfer case have separate drain and filler plugs. Park vehicle on level surface. To check transmission fluid level, remove transmission filler plug. Fluid should flow from filler plug hole. Add fluid if necessary. Install and tighten filler plug. See TORQUE SPECIFICATIONS .
To check transfer case fluid level, remove transfer case filler plug (upper plug) from rear of transfer case. Filler plug is located near speedometer gear housing. Fluid level must be at bottom of filler plug hole. Install and tighten filler plug. Refer to TORQUE SPECIFICATIONS .