LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1990 >> Sidekick JS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> TPS R & I (Swift SOHC A/T) >> Removal & Installation (Swift SOHC A/T)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Swift SOHC A/T)

  1. Disconnect negative battery cable. Unplug TPS wiring harness connector. Remove mounting bolts and remove TPS from throttle body.
  2. Install throttle position sensor so its adjusting holes slightly cover mounting bolt holes. See Figure . Turn sensor so mounting holes align. Install sensor mounting bolts and finger tighten only.
  3. Clamp wiring harness securely to side of throttle body. Connect negative battery cable. Adjust TPS. See ON-VEHICLE ADJUSTMENTS article. Torque TPS mounting bolts to 14-20 INCH lbs. (1.5-2.2 N.m).
scientia non olet · About LEMON Manuals