Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Engine Mount & Lower Bracket

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

Install the engine mount (3) and the lower bracket (4) to the vehicle.
Tightening torque

Tighten the lower bracket bolts to 50 N.m (38 lb ft) .
Install the ABS connector clip to the frame.
Install the upper engine mount bracket nuts (1).
Tightening torque

Tighten the upper engine mount bracket nuts to 50 N.m (38 lb ft) .

Fig 2: Installing Engine Mount Upper Bracket & Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Install the engine mount upper bracket and bolt (1) to the engine. Do not tighten the bolt.

Fig 3: Installing Right Upper Engine Mount Bracket Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Tighten the right upper engine mount bracket bolt (2).
Tightening torque

Tighten the right upper engine mount bracket bolt to 50 N.m (38 lb ft) .
Install the upper engine mount bracket bolts (1).
Tightening torque

Tighten the upper engine mount bracket bolts to 110 N.m (81 lb ft) .
Lower the vehicle.
Remove the engine support. Refer to ENGINE SUPPORT FIXTURE .
Install the air cleaner assembly. Refer to INSTALLATION PROCEDURE .