LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1989 >> Sidekick JLX, Standard >> Repair and Diagnosis >> Transmission >> Clutches >> Removal & Installation >> Clutch Release Shaft >> Samurai
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clutch Release Shaft: Samurai

  1. Remove clutch release bearing. Remove release lever. Remove return spring from clutch release shaft. Check shaft for wear or damage.
  2. Position Clutch Release Bushing Remover (09925-48210 ) against bushing No. 2 and lightly tap out bushing and cap. Repeat procedure and remove bushing No. 1 with seal. See Figure .
  3. Install release shaft. Apply grease to release fork contact surfaces. Apply grease to both ends of clutch cable. To complete installation, reverse removal procedures. Clutch release arm bolt and nut should be tightened to 90-138 INCH lbs. (10-16 N.m).
scientia non olet · About LEMON Manuals