Input Shaft Seal Replacement - Left

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Input Shaft Seal - Left

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT AND COMPONENT NAME TABLE

Callout	Component Name
1	Transfer Case Input Shaft Seal - Left CAUTION: Do not use a screwdriver or punch to remove the seal. Using a screwdriver or punch to remove the seal may damage the aluminum housing sealing surface. Special Tools DT-48074 Input and Output Shaft Seal Installer J 8092 Driver Handle J 26941 Bushing and Bearing Remover - 3-4 in J 45124 Removal Bridge