Trim Height Specifications

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

TRIM HEIGHT SPECIFICATIONS

Application	Specification
Application	Metric	English
Front Curb Bumper Height (A)	415 mm ± 25 mm	16.34 in ± 0.98 in
Rear Curb Bumper Height (B)	432 mm ± 25 mm	17.00 in ± 0.98 in
Front Body Height (J)	258 mm ± 15 mm	10.16 in ± 0.59 in
Rear Body Height (K)	274 mm ± 15 mm	10.79 in ± 0.59 in
Front Suspension Height (Z)	19 mm ± 10 mm	0.75 in ± 0.39 in
Rear Suspension Height (D)	13 mm ± 10 mm	0.51 in ± 0.39 in
The front curb height A (represented as (a) on the figure) is measured at a distance (c) 362 mm (14.25 in) from the center line of the vehicle. The rear curb height B (represented as (b) on the figure) is measured at a distance (d) 362 mm (14.25 in) from the center line of the vehicle. The front body height J (J) is measured at a distance (a) 445 mm (17.5 in) rearward from the center line of the front wheel. The rear body height K (K) is measured at a distance (a) 447 mm (17.6 in) in front of the center line of the rear wheel. The rear suspension D Height is the difference (D = a - b) measured as a horizontal line thru the center of the cradle attachment bolt (a) and the center of the knuckle attachment bolt (b). *** All measurements are taken with a full tank of gas.

Fig 1: Identifying Z Height For Front Suspension

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Identifying D Height For Front Suspension

Courtesy of SUZUKI OF AMERICA CORP.

Fig 3: Measuring Front & Rear Bumper Height

Courtesy of SUZUKI OF AMERICA CORP.

Fig 4: Measuring A Or B Height

Courtesy of SUZUKI OF AMERICA CORP.