LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1988 >> Samurai Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System Bleeding >> Pressure Tank Bleeding
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pressure Tank Bleeding

  1. On all models, exhaust all vacuum from power unit by depressing brake pedal several times.
  2. Clean the master cylinder cap and surrounding are, then remove cap. With pressure tank at least 1/2 full, connect tank to the master cylinder using proper adapter(s).
  3. Attach bleeder hose to first bleeder valve to be serviced. See BRAKE LINE BLEEDING SEQUENCE table in this article. Place other end of hose in clean transparent container. Partially fill container with clean brake fluid until end of hose is submerged in fluid.
  4. Open release valve on pressure bleeder. Open bleeder valve 1-2 turns, noting fluid flow. When fluid flowing into container is clear and free of bubbles, close bleeder valve securely.
  5. Finish bleeding system in the same manner using correct sequence. Remove pressure tank from master cylinder and check fluid level of master cylinder.
scientia non olet · About LEMON Manuals