Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Door Hinge To Body Bolts (1 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

WARNING: In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door pillar in the area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the SIS.

Disconnect the wiring harness at the door jamb.
Remove the rear door check link. Refer to REMOVAL PROCEDURE .
Support the door.
Using a soft marker, mark around the outside of the hinge for installation purposes.
With the aid of an assistant, remove the door hinge to body bolts.
With the aid of an assistant, remove the rear door from the vehicle.