Installation Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Position the seal over the flange in the position noted in the removal procedure.
- Press the seal over the flange firmly to fully secure.
- Locate an exposed end of the ripcord at the seal joint and pull the ripcord around the door opening. If the seal lip is positioned under any door trim, this process will bring the seal lip over the door trim and headliner.
- Install the rear door carpet retainer. Refer to REAR CARPET RETAINER REPLACEMENT ] in Interior Trim article.