Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
Remove the rear tire and wheel assembly. Refer to REMOVAL PROCEDURE .

Fig 1: Identifying Stabilizer Shaft Clamp Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Loosen the stabilizer shaft clamp bolts.

Fig 2: Identifying Stabilizer Link To Stabilizer Link To Stabilizer Shaft Nut
Courtesy of SUZUKI OF AMERICA CORP.

NOTE: Hold the ball shaft secure with a TORX® bit, when removing the nut.
Remove the stabilizer link to stabilizer shaft nut.

Fig 3: Identifying Stabilizer Link To Lower Control Arm Nut (1 Of 2)
Courtesy of SUZUKI OF AMERICA CORP.

NOTE: When disconnecting the stabilizer link, hold the link with a wrench to prevent turning.
Remove the stabilizer link to lower control arm nut.
Remove the stabilizer link from the vehicle.