Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Positioning Wheel Bearing To Knuckle

Courtesy of SUZUKI OF AMERICA CORP.

Position the wheel bearing to the knuckle.

Fig 2: Identifying Wheel Bearing Bolts
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .
Install the 4 wheel bearing bolts.
Tightening torque

Tighten the 4 wheel bearing bolts to 125 N.m (92 lb ft).

Fig 3: Identifying Rear Wheel Driveshaft Nut
Courtesy of SUZUKI OF AMERICA CORP.
If equipped with AWD, install the rear wheel driveshaft nut.
Tightening torque

Tighten the rear wheel driveshaft nut to 70 N.m (52 lb ft).
Install the wheel speed sensor. Refer to REAR WHEEL SPEED SENSOR REPLACEMENT .
Install the brake rotor. Refer to REAR BRAKE ROTOR REPLACEMENT .
Install the rear tire and wheel assembly. Refer to INSTALLATION PROCEDURE .
Lower the vehicle.