Liftgate Emblem and Nameplate Replacement
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of SUZUKI OF AMERICA CORP. LIFTGATE EMBLEM AND NAMEPLATE REFERENCE TABLE
| Callout |
Component Name |
| 1 |
Liftgate Name Plate Assembly (Suzuki)
- When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a J 25070 or equivalent to remove old nameplate. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
|
| 2 |
Liftgate Nameplate Assembly (XL7)
- When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a J 25070 or equivalent to remove old emblem. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new emblem.
|
| 3 |
Liftgate Name Plate Assembly (AWD)
- When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
- Use a J 25070 or equivalent to remove old nameplate. Clean all adhesive from rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
|