LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Electrical Devices) >> Repair Instruction >> Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 2 (Left Side) Intake >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying CMP Actuator Solenoid Valve & Bolt (2 Of 2)
G04841353Courtesy of SUZUKI OF AMERICA CORP.
  1. Inspect the CMP actuator solenoid valve seal for damage. Replace the seal if necessary.
  2. Install the CMP actuator solenoid valve.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the CMP actuator solenoid valve bolt.

    Tightening torque 

    Tighten the bolt to 10 N.m (89 lb in)  .

    Fig 2: Connecting Engine Wiring Harness Electrical Connector To Bank 2 Intake CMP Actuator Solenoid Valve
    G04841354Courtesy of SUZUKI OF AMERICA CORP.
  4. Connect the engine wiring harness electrical connector (2) to the bank 2 intake CMP actuator solenoid valve.
  5. Install the engine mount strut bracket. Refer to INSTALLATION PROCEDURE .
scientia non olet · About LEMON Manuals