Front Toe Adjustment

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Position and lock the steering wheel with the vehicle with the wheels in the straight forward position.

Fig 1: Identifying Both Inner Tie Rod Jam Nuts
Courtesy of SUZUKI OF AMERICA CORP.
Loosen both inner tie rod jam nuts.
NOTE: The inner tie rod must rotate freely from the boot seal surface. Do not allow the boot to rotate.
Loosen the inner tie rod seal to boot surface.
Use a wrench on the tie rod flats to increase or decrease the toe angle specifications. Refer to WHEEL ALIGNMENT SPECIFICATIONS .
CAUTION: Refer to FASTENER NOTICE .
Tighten the inner tie rod jam nuts.
Tightening torque

Tighten the jam nuts to 60 N.m (44 lb ft) .
Inspect the toe angle to ensure proper adjustment and adjust as necessary.