LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Wheel And Tires) >> Repair Instruction >> Tire and Wheel Assembly Balancing - Off Vehicle >> Tire and Wheel Assembly Balancing Guidelines
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tire and Wheel Assembly Balancing Guidelines

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Tire and wheel assemblies which exhibit excessive runout can produce vibrations even if the assemblies are balanced.

It is strongly recommended that the tire and wheel assembly runout be measured and corrected if necessary BEFORE the assemblies are balanced.

If the runout of the tire and wheel assemblies has not yet been measured, refer to TIRE AND WHEEL ASSEMBLY RUNOUT MEASUREMENT - OFF VEHICLE  before proceeding.

There are 2 types of tire and wheel balance:

scientia non olet · About LEMON Manuals