LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Sun Roof/T Top/Convertible Top) >> Repair Instructions >> Sunroof Motor/Actuator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Distance Between Left Slide & Track Bracket
G04844592Courtesy of SUZUKI OF AMERICA CORP.
  1. Manually adjust the track to achieve a distance of (a) 44.5 mm (1.75 in) between the left slide and track bracket.
  2. Manually adjust the track to achieve a distance of (a) 44.5 mm (1.75 in) between the right slide and track bracket.
  3. Install the sunroof motor to the sunroof module.
    CAUTION: Refer to FASTENER NOTICE .
  4. Install the sunroof motor screws.

    Tightening torque 

    Tighten the screws to 5 N.m (44 lb in). 

    Fig 2: Identifying Sunroof Motor
    G04844593Courtesy of SUZUKI OF AMERICA CORP.
  5. Connect the electrical connectors to the sunroof motor.
  6. Secure the electrical harness to the sunroof module.
  7. Verify the sunroof operation.
  8. Install the sunroof window. Refer to Installation Procedure .
  9. Install the headliner. Refer to HEADLINING TRIM PANEL REPLACEMENT .
scientia non olet · About LEMON Manuals