Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Engine Mount To Lower Bracket

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

Install the engine mount (3) to the lower bracket (4).
Tightening torque

Tighten the nuts to 50 N.m (38 lb ft) .

Fig 2: Installing Engine Mount Upper Bracket & Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Install the engine mount upper bracket and bolt (1) to the engine. Do not tighten the bolt.
Install the ABS connector clip to the bracket.

Fig 3: Installing Lower Bracket Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the lower bracket bolts (2).
Tightening torque

Tighten the lower bracket bolts to 50 N.m (38 lb ft) .
Install the upper engine mount bracket nuts (1).
Tightening torque

Tighten the upper engine mount bracket nuts to 50 N.m (38 lb ft) .

Fig 4: Installing Right Upper Engine Mount Bracket Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Install the upper engine mount bracket bolts (1).
Tightening torque

Tighten the upper engine mount bracket bolts to 50 N.m (38 lb ft) .
Tighten the right upper engine mount bracket bolt (2) to 10 N.m (89 lb in).
Tightening torque

Tighten the right upper engine mount bracket bolt to 50 N.m (38 lb ft) .
Lower the vehicle.
Remove the engine support. Refer to ENGINE SUPPORT FIXTURE .
Install the drive belt. Refer to INSTALLATION PROCEDURE .
Install the air cleaner assembly. Refer to INSTALLATION PROCEDURE .