Exhaust Manifold Removal - Right Side

Reference: OIL FILTER ADAPTER REMOVAL

Fig 1: Identifying Right Exhaust Manifold Heat Shield Bolts

Courtesy of SUZUKI OF AMERICA CORP.

1. Remove the right exhaust manifold heat shield bolts.
   Fig 2: Identifying Right Exhaust Manifold Heat Shield

   Courtesy of SUZUKI OF AMERICA CORP.
2. Remove the right exhaust manifold heat shield.
   Fig 3: Removing Right Exhaust Manifold Bolts From Right Cylinder Head

   Courtesy of SUZUKI OF AMERICA CORP.
3. Remove the right exhaust manifold bolts from the right cylinder head.
   Fig 4: Removing Right Exhaust Manifold Nuts From Studs In Right Cylinder Head

   Courtesy of SUZUKI OF AMERICA CORP.
4. Remove the right exhaust manifold nuts from the studs in the right cylinder head.
   Fig 5: Identifying Right Exhaust Manifold

   Courtesy of SUZUKI OF AMERICA CORP.
5. Remove the right exhaust manifold.
   Fig 6: Identifying Right Exhaust Manifold Gasket

   Courtesy of SUZUKI OF AMERICA CORP.
6. Remove and discard the right exhaust manifold gasket.
   Fig 7: Identifying Right Cylinder Head Studs

   Courtesy of SUZUKI OF AMERICA CORP.
7. Remove the studs from the right cylinder head.
   Fig 8: Identifying Right Knock Sensor Heat Shield Bolts

   Courtesy of SUZUKI OF AMERICA CORP.
8. Remove the right knock sensor heat shield bolts.
   Fig 9: Identifying Right Knock Sensor Heat Shield

   Courtesy of SUZUKI OF AMERICA CORP.
9. Remove the right knock sensor heat shield.
   Fig 10: Identifying Right Knock Sensor Bolt

   Courtesy of SUZUKI OF AMERICA CORP.
10. Remove the right knock sensor bolt.
    Fig 11: Identifying Right Knock Sensor

    Courtesy of SUZUKI OF AMERICA CORP.
11. Remove the right knock sensor.
    Fig 12: Identifying Crankshaft Position (CKP) Sensor Bolt

    Courtesy of SUZUKI OF AMERICA CORP.
12. Remove the crankshaft position (CKP) sensor bolt.
    Fig 13: Identifying Crankshaft Position (CKP) Sensor

    Courtesy of SUZUKI OF AMERICA CORP.
13. Remove the CKP sensor.
    Fig 14: Identifying CKP Sensor O-Ring

    Courtesy of SUZUKI OF AMERICA CORP.
14. Remove and discard the CKP sensor O-ring.
    Fig 15: Identifying Engine Block Heater

    Courtesy of SUZUKI OF AMERICA CORP.
15. Remove the engine block heater, if equipped.

Reference: EXHAUST MANIFOLD CLEANING AND INSPECTION - RIGHT SIDE