LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Cord Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Disconnect the coolant heater power supply cord from the coolant heater (1).
  3. Disconnect the coolant heater cord clip (2) from the coolant heater cord.
  4. Lower the vehicle.
  5. Disconnect the coolant heater cord clips (3, 4) from the engine wiring harness conduit.
    Fig 1: Disconnecting Coolant Heater Cord Clips From Wiring Harness
    G04842663Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the coolant heater cord clip (1) from the air cleaner assembly.
  7. Remove the coolant heater cord clip (2) from the fender panel.
    Fig 2: Removing Coolant Heater Cord Clip From Air Cleaner Assembly
    G04842664Courtesy of SUZUKI OF AMERICA CORP.
  8. Remove the coolant heater cord from the vehicle.
scientia non olet · About LEMON Manuals