LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine General Information And Diagnosis) >> Diagnostic Information and Procedures >> DTC P0560 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the voltage at the battery terminals and compare it with the scan tool ECM Ignition 1 signal parameter. Verify that battery and Ignition 1 signal readings do not differ more than 1.0 volt.
    • If greater than the specified value, test the Ignition 1 and ground circuits of the ECM for an open/high resistance. If the circuits test normal replace the ECM.
  2. Go to CHARGING SYSTEM TEST .
scientia non olet · About LEMON Manuals