LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Differential) >> Repair Instructions >> Rear Axle Shaft Seal Replacement - Left Side >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Axle Shaft Seal (2 Of 2)
G04843792Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the J 8092 to the J 33832.
  2. Using the J 8092 and the J 33832, install the axle shaft seal (1).
  3. Lift and position the differential in the rear cradle.
    Fig 2: Identifying Left Rear Differential Support Bushing Bolt
    G04843793Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the left rear support bolt.
  5. Remove the transmission jack stand.
  6. Install the left rear wheel drive shaft. Refer to INSTALLATION PROCEDURE .
  7. Install the propeller shaft. Refer to INSTALLATION PROCEDURE .
  8. Install the muffler assembly. Refer to INSTALLATION PROCEDURE .
  9. Remove the spare tire.
  10. Fill the rear differential with fluid. Refer to REAR AXLE LUBRICANT REPLACEMENT .
scientia non olet · About LEMON Manuals