Scan Tool Data Definitions - Rear Drive Axle

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

The rear differential clutch control module (CCM) scan tool data definitions contain a brief description of all CCM related parameters available on the scan tool. The parameters available on the scan tool are listed below in alphanumeric order.

Accelerator Pedal Position Sensor The scan tool displays a percent of pedal opening position. The scan tool displays a range from 0 to 100%.

Battery Voltage The scan tool displays volts. The scan tool displays a range from 0 to 25.5 volts.

Est. RDS clutch Spd. Variation The scan tool displays 1/min. The scan tool indicates a range from -640 to 635 RPMs.

Estimate clutch Temperature The scan tool displays °C. The scan tool indicates a range from -40 to 215°C.

LF Wheel Speed Sensor The scan tool displays 0-160 km/h (0-99.5 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).

LR Wheel Speed Sensor The scan tool displays 0-160 km/h (0-99.5 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).

Rear Drive Solenoid Cmd. The scan tool displays °C. The scan tool indicates a range from -40 to 215°C.

Rear Drive System Temperature Sensor The scan tool displays °C. The scan tool indicates a range from -40 to 215°C.

Rear Drive Torque Command The scan tool displays N-m. The scan tool displays a range from 0 to 2550 N-m.

RF Wheel Speed Sensor The scan tool displays 0-160 km/h (0-99.5 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).

RR Wheel Speed Sensor The scan tool displays 0-160 km/h (0-99.5 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).

Vehicle Speed The scan tool displays 0-1024 km/h (0-636 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving.