No. 2 Rear Control Valve Body Disassemble

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: CONTROL VALVE BODY ASSEMBLY DISASSEMBLE .

Fig 1: Identifying Rear Control Valve Body Assembly Spacer Plate And Gaskets

Courtesy of SUZUKI OF AMERICA CORP.

WARNING: Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.

Remove the gasket (327).
Remove the rear control valve body assembly spacer plate (328).
Remove the gasket (329).

Fig 2: Identifying TCC Check Valve Spring & TCC Check Valve
Courtesy of SUZUKI OF AMERICA CORP.
Remove the TCC check valve (450).
Remove the TCC check valve spring (449).
Remove the 2 accumulator check valve assemblies (353).

Fig 3: Identifying Reverse Shift Restrict Ball Check Valve Bushing & Valve
Courtesy of SUZUKI OF AMERICA CORP.
Remove the sleeve/bore plug retainer (459).
Remove the reverse shift restrict ball check valve bushing - outer (453).
Remove the reverse shift restrict ball check valve (452).
Remove the reverse shift restrict ball check valve bushing - inner (451).

Fig 4: Identifying Lock Up Control Valve Sleeve & Lock Up Control Valve Plunger
Courtesy of SUZUKI OF AMERICA CORP.
Remove the sleeve/bore plug retainer (458).
Remove the lock up control valve sleeve (457).
Remove the lock up control valve spring (456).
Remove the lock up control valve plunger (455).
Remove the lock up control valve (454).

Fig 5: Identifying Second Clutch Control Valve & Second Clutch Control Valve Spring
Courtesy of SUZUKI OF AMERICA CORP.
Remove the sleeve/bore plug retainer (459).
Remove the second clutch (B2) control valve plug (448).
Remove the second clutch (B2) control valve spring (447).
Remove the second clutch (B2) control valve (446).
Reference: NO. 2 REAR CONTROL VALVE BODY ASSEMBLE .