Fluid Pump Cleaning and Inspection

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: TRANSMISSION FLUID PUMP DISASSEMBLE .

Special Tool

J 45185 Bore Gauge Set

Fig 1: Measuring Inner Diameter Of Fluid Pump Body Bushing

Courtesy of SUZUKI OF AMERICA CORP.

Using the J 45185, measure the inner diameter of the fluid pump body bushing. Measure the bushing in different locations and take the average.
Use micrometer to measure J 45185 reading.
Specification

Fluid pump body bushing I.D: 38.113 - 38.188 mm (1.500 - 1.503 in)

Fig 2: Measuring Inner Diameter Of Stator Shaft Bushing
Courtesy of SUZUKI OF AMERICA CORP.
Using the J 45185, measure the inner diameter of the stator shaft bushing. Measure the bushing in different locations and take the average.
Use micrometer to measure J 45185 reading.
Specification

Stator shaft bushing I.D: 22.201 - 22.257 mm (0.874 - 0.876 in)
Replace the fluid pump assembly if the measurements are greater than the specification.
Reference: TRANSMISSION FLUID PUMP ASSEMBLE .