Control Valve Body Assembly Removal

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: WIRING HARNESS REMOVAL .

Fig 1: Identifying Control Valve Body Bolts, Body Fluid Passage Cover & Gasket

Courtesy of SUZUKI OF AMERICA CORP.

Place the transmission in Neutral (N).
Remove the 2 control valve body bolts/screws (30), control valve body fluid passage cover (37) and gasket (38).

Fig 2: Identifying Control Valve Body Mounting Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the six 10 mm control valve body mounting bolts/screws (1-6).

Fig 3: Identifying Manual Shift Detent Lever Assembly, Control Valve Body Assembly & Manual Valve Link
Courtesy of SUZUKI OF AMERICA CORP.
While holding the control valve body assembly, disconnect the manual shift detent lever assembly (710) from the manual valve link (336).
Move the detent lever assembly to the neutral position for ease of removing the manual valve.
Remove the control valve body assembly (39).

Fig 4: Identifying Case Fluid Passage Seals
Courtesy of SUZUKI OF AMERICA CORP.
Remove the 2 case fluid passage seals (86).
Reference: CONTROL VALVE BODY ASSEMBLY DISASSEMBLE .