Circuit/System Verification
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the DTC information with a scan tool.
- Record Freeze Frame and Failure Records.
- Clear DTC's.
- Operate the vehicle under the conditions observed in the Failure Records.
- Observe the DTC information with the scan tool. Verify that the DTC does not set.
- Operate the vehicle in D (drive). Using a scan tool, observe the TCC Slip Speed parameter in 3rd, 4th, and 5th gear while the TCC PC Sol. Ref. Current parameter is less than 100 mA. The TCC Slip Speed parameter should be greater than 50 RPM.