Rear Seat Number 2 Back Cushion Latch Release Handle Replacement

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Seat No. 2 Back Release Handle & Screws

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENTS REFERENCE

Callout	Component Name
1	Rear Seat No. 2 Back Release Handle Screw (Qty: 2) CAUTION: Refer to FASTENER NOTICE . Tightening torque 2 N.m (18 lb ft) Tip: Pull on the release handle to access the screws.
2	Rear Seat No. 2 Back Release Handle Tip: Disconnect the seat back release handle cable from the handle assembly.