Fastener Tightening Specifications - Heating, Ventilation and Air Conditioning
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS - HEATING, VENTILATION AND AIR CONDITIONING
| Application | Specifications | |
|---|---|---|
| Metric | English | |
| Air Inlet Assembly Screws | 1.5 N.m | 13 lb in |
| Air Outlet Duct Screws | 1.5 N.m | 13 lb in |
| Auxiliary A/C Line to Evaporator Outlet Hose Nut | 20 N.m | 15 lb ft |
| Auxiliary A/C Line to Liquid Line Nut | 20 N.m | 15 lb ft |
| Auxiliary A/C Lines to Auxiliary TXV Nut | 20 N.m | 15 lb ft |
| Auxiliary A/C Lines to Underbody Bolt | 9 N.m | 80 lb in |
| Auxiliary A/C Lines to Underbody Nuts | 9 N.m | 80 lb in |
| Auxiliary HVAC Actuator Screws | 1.5 N.m | 13 lb in |
| Auxiliary HVAC Blower Motor Control Module Screws | 1.5 N.m | 13 lb in |
| Auxiliary HVAC Blower Motor Screws | 1.5 N.m | 13 lb in |
| Auxiliary HVAC Ducts to Body Bolts | 8 N.m | 71 lb in |
| Auxiliary HVAC Ducts to Body Nuts | 8 N.m | 71 lb in |
| Auxiliary HVAC Module Assembly Screws | 1.5 N.m | 13 lb in |
| Auxiliary HVAC Module to Body Bolts | 9 N.m | 80 lb in |
| Auxiliary HVAC TXV Backing Plate Bolts | 3.5 N.m | 31 lb in |
| Battery Box to Body Bolts | 15 N.m | 11 lb ft |
| Blower Case Assembly Screws | 1.5 N.m | 13 lb in |
| Blower Motor Control Module Screws | 1.5 N.m | 13 lb in |
| Blower Motor Screws | 1.5 N.m | 13 lb in |
| Compressor Clutch Bolt | 21 N.m | 16 lb ft |
| Compressor Clutch Coil Connector Bracket Screw | 4.3 N.m | 38 lb in |
| Compressor Clutch Coil Screws | 4.9 N.m | 43 lb in |
| Compressor Hose Assembly to Battery Box Nut | 9 N.m | 80 lb in |
| Compressor Hose Assembly to Compressor Nut | 20 N.m | 15 lb ft |
| Compressor Hose Assembly to Condenser Nut | 20 N.m | 15 lb ft |
| Compressor Pressure Relief Valve | 8.8 N.m | 78 lb in |
| Compressor to Engine Bolts | 50 N.m | 37 lb ft |
| Condenser to Radiator Bolts | 9 N.m | 80 lb in |
| CRFM Bracket Bolts | 20 N.m | 15 lb ft |
| Evaporator Case Assembly Screws | 1.5 N.m | 13 lb in |
| Evaporator Outlet Hose and Liquid Line Clamp Bracket Nut to TXV | 20 N.m | 15 lb ft |
| Evaporator Outlet Hose to Compressor Hose Nut | 20 N.m | 15 lb ft |
| Front of Dash to HVAC Module Seal Nuts | 9 N.m | 80 lb in |
| Heater Core Cover Screws | 1.5 N.m | 13 lb in |
| HVAC Module to Cross Car Beam Nuts and Bolts | 8 N.m | 71 lb in |
| Intermediate Duct Fasteners | 2.5 N.m | 22 lb in |
| Liquid Line to Condenser Nut | 20 N.m | 15 lb ft |
| Liquid Line to Strut Tower Nut | 9 N.m | 80 lb in |
| Mode Actuator to Evaporator Case Screws | 1.5 N.m | 13 lb in |
| Mode Cam Bracket to Evaporator Case Screws | 1.5 N.m | 13 lb in |
| Passenger Compartment Air Filter Housing Nuts | 9 N.m | 80 lb in |
| Receiver Dehydrator to Condenser Bolt | 4.2 N.m | 37 lb in |
| Receiver Dehydrator Upper Clamp Bolt to Condenser | 6.5 N.m | 58 lb in |
| Refrigerant Pressure Sensor to Compressor Hose Assembly | 4 N.m | 35 lb in |
| Surge Tank to Body Bolts | 9 N.m | 80 lb in |
| TXV Backing Plate Bolts | 3.5 N.m | 31 lb in |