Removal Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure
- For compression style fittings use a back up wrench on the fitting (2) and loosen the fitting nut (1).
- For banjo style fittings remove the bolt retaining the banjo type fitting.
- Remove the O-ring seal from the A/C refrigerant component.
- Inspect the O-ring seal for signs of damage to help determine the root cause of the failure.
- Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.NOTE: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
- Cap or tape the A/C refrigerant components.
- Discard the O-ring seal.