Circuit/System Description
The upper and lower duct air temperature sensors allow the HVAC control module to monitor the temperature of the discharge air in the HVAC instrument panel air ducts. The module applies 5 volts to internal input resistors that are connected to the signal circuits of the air temperature sensors. The module provides ground to the air temperature sensors through the low reference circuit. The HVAC control module monitors the voltage drops across the air temperature sensors and uses the inputs for automatic control calculations. When the duct air temperatures are hot, the resistances of the sensors are low and the voltage signals are low. The HVAC control module converts the voltage values to count values where one volt is approximately equal to 51 counts.