LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Air Bag System) >> Schematic and Routing Diagram >> SIR Connector End Views >> Rollover Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rollover Sensor

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rollover Sensor - Connector Terminal
G04844104Courtesy of SUZUKI OF AMERICA CORP.

Connector Part Information 

OEM: 6189-6936

Service: -

Description: 6-Way F 0.64 Series Sealed (YE)

Terminal Part Information 

Pins: 1, 6

Terminal/Tray: 8100-3427/22

Core/Insulation Crimp: K/K

Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)

Pins: 3, 4, 4, 5

Terminal/Tray: 8100-3426/22

Core/Insulation Crimp: J/J

Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)

ROLLOVER SENSOR REFERENCE TABLE

Pin Wire Color Circuit No. Function
1 RD/WH 1340 Battery Positive Voltage
2 - - Not Used
3 D-GN 5060 Low Speed GMLAN Serial Data
4 D-GN 5060 Low Speed GMLAN Serial Data
5 YE/BK 5229 Roll Over Sensor High Signal
6 BK/WH 651 Ground