SIR/SRS Connector Repair (Plastic Body and Terminal Metal Pin)
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
The terminals in the SIR/SRS system are made with a special plating. This plating provides the necessary contact integrity for the sensitive, low energy circuits. Use the J-38125 SIR/SRS Terminal Repair Kit for repairing SIR/SRS terminals and connectors. Do not substitute any other terminals for those in the repair kit.
The J-38125 SIR/SRS Terminal Repair Kit contains:
- Various terminated leads for sensing and diagnostic module (SDM) terminal replacement
- Various connector positive assurance (CPA) locks for SIR/SRS connectors
- Base of steering column pigtail connectors part number 12085514
- Yellow vinyl electrical tape
Pigtail repair packs are available for SIR/SRS connectors with eight or less terminals. Only the connector body is available for connectors with more than eight terminals. The terminated leads in the J-38125 SIR/SRS Terminal Repair Kit can be used to replace damaged terminals when replacing the connector body.